-11%
,

Synology Expansion Unit RX418 – RX418


The RX418 4-Bay Expansion Unit from Synology is designed to provide storage expansion for their RS818+ RS818RP+, RS815+, RS815RP+, RS816, and RS815 NAS arrays. It can also be used as a dedicated local backup destination for Synology 1 RU RackStation arrays for comprehensive data protection.

The four drive bays of the RX418 natively support 3.5″ and 2.5″ SATA hard drives and SSDs. The drives are hot-swappable and there is also RAID management through Disk Station Manager. The RX418 is equipped with an eSATA port, which allows for connectivity with your host NAS, and operates using a 100W power supply that runs using 100-240 VAC at 50/60 Hz. Included is an accessory pack, an AC power cord, and an eSATA cable.

General Features

Storage Capacity Expansion

When the storage capacity on a 1 RU RackStation reaches its limit, the RX418 expansion unit provides easy capacity expansion by adding four 3.5″/2.5″ SATA drives to the system. The RX418 can also be used as a dedicated local backup destination of a 1 RU RackStation for comprehensive data protection.

Plug-and-Play Design

Simply connect the RX418 to a corresponding RackStation and it is ready to use. Drives in the connected RX418 operate as though they were internal to the connected NAS and can be managed directly by DiskStation Manager (DSM), with no additional software installation required.

301,156.48 337,573.50

Synology RX418 4-Bay Expansion Unit

The RX418 4-Bay Expansion Unit from Synology is designed to provide storage expansion for their RS818+ RS818RP+, RS815+, RS815RP+, RS816, and RS815 NAS arrays. It can also be used as a dedicated local backup destination for Synology 1 RU RackStation arrays for comprehensive data protection.

The four drive bays of the RX418 natively support 3.5″ and 2.5″ SATA hard drives and SSDs. The drives are hot-swappable and there is also RAID management through Disk Station Manager. The RX418 is equipped with an eSATA port, which allows for connectivity with your host NAS, and operates using a 100W power supply that runs using 100-240 VAC at 50/60 Hz. Included is an accessory pack, an AC power cord, and an eSATA cable.

General Features

Storage Capacity Expansion

When the storage capacity on a 1 RU RackStation reaches its limit, the RX418 expansion unit provides easy capacity expansion by adding four 3.5″/2.5″ SATA drives to the system. The RX418 can also be used as a dedicated local backup destination of a 1 RU RackStation for comprehensive data protection.

Plug-and-Play Design

Simply connect the RX418 to a corresponding RackStation and it is ready to use. Drives in the connected RX418 operate as though they were internal to the connected NAS and can be managed directly by DiskStation Manager (DSM), with no additional software installation required.
Synology-RX418-4-Bay-Expansion-Unit-ikeja-lagos-abuja-nigeria
Synology RX418 4-Bay Expansion Unit

Read more link

SKU: RX418 Categories: ,

Hardware Specifications

Applied Models

Supports creating volumes across different units
  • 20 series:RS820RP+, RS820+
  • 19 series:RS1219+, RS819
  • 18 series:RS818RP+, RS818+
  • 16 series:RS816
  • 15 series:RS815RP+, RS815+, RS815
Supports creating volumes on a single unit only RS217
Notes
  • For more information on the compatibility of each expansion unit, please refer to this article.
  • To have better performance, we recommend creating storage volumes physically located within the same NAS or Expansion Unit, rather than creating volumes across your NAS and Expansion Unit.
  • DSM version requirement: 6.1.4-15217-3 or later version

Storage

Drive Bays 4
Compatible Drive Type* (See all supported drives)
  • 3.5″ SATA HDD
  • 2.5″ SATA HDD
  • 2.5″ SATA SSD
Maximum Internal Raw Capacity 64 TB (16 TB drive x 4) (Capacity may vary by RAID types)
Hot Swappable Drive
RAID Management through Synology DSM

External Ports

eSATA Port 1

Appearance

Size (Height x Width x Depth) 44 mm x 430.5 mm x 290 mm
Size (Height x Width x Depth) (with server ears) 44 mm x 480 mm x 325 mm
Weight 4.28 kg
Rack Installation Support*
  • 4-post 19″ rack (Synology Rail Kit – RKM114/RKS1317)
  • 2-post 19″ rack (direct mounting)
Notes The rail kit is sold separately

Power

Power Recovery Synchronized with the Synology RackStation
Power Supply Unit / Adapter 100 W
AC Input Power Voltage 100 V to 240 V AC
Power Frequency 50/60 Hz, Single Phase
Power Consumption* 23.26 W (Access)
6.39 W (HDD Hibernation)
British Thermal Unit 79.42 BTU/hr (Access)
21.82 BTU/hr (HDD Hibernation)
Notes Power consumption is measured when it is fully loaded with Western Digital 1TB WD10EFRX hard drive(s).

Temperature

Operating Temperature 5°C to 35°C (40°F to 95°F)
Storage Temperature -20°C to 60°C (-5°F to 140°F)
Relative Humidity 5% to 95% RH

Others

System Fan 40 mm x 40 mm x 3 pcs
Noise Level* 25.1 dB(A)
Notes Noise Level Testing Environment: Fully loaded with Seagate 1TB ST31000520AS hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%

Certification

  • FCC
  • CE
  • BSMI
  • EAC
  • VCCI
  • RCM
  • KC

Warranty

3-year hardware warranty, extendable to 5-year coverage – EW201
Notes The warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)

Environment & Packaging

Environment

RoHS Compliant

Packaging Content

  • Main Unit X 1
  • User’s Guide X 1
  • Accessory Pack X 1
  • AC Power Cord X 1
  • Expansion Cable: SATA X 1

Optional Accessories

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Synology Expansion Unit RX418 – RX418”

There are no reviews yet.

You may also like…

TechSjop Help Chat
Hi there! Use this box to send us a message via WhatsApp...