© 2023 - All Rights Reserved
WD WESTERN DIGITAL 4TB Red Plus 5400 rpm SATA III 3.5″ Internal Intelligent NAS HDD
₦55,000.00
WD WESTERN DIGITAL 4TB Red Plus 5400 rpm SATA III 3.5″ Internal NAS HDD
Expand the capacity of your small- to medium-sized business or home office NAS with the WD 4TB Red Plus 5400 rpm SATA III 3.5″ Internal NAS HDD bundle from B&H. This kit includes two 4TB 3.5″ 5400 rpm SATA III NAS hard drives for a total of 8TB. With multiple drives, you can configure various RAID modes to help enhance transfer speeds and the data integrity for your NAS. Each WD Red Plus drive uses CMR technology and features a sustained data transfer rate of up to 150 MB/s with a built-in noise and vibration protection.
General Features
Tackle Intensity with WD Red Plus
Packed with the power to handle the small- to medium-sized business NAS environments and increased workloads for SOHO customers, WD Red Plus is madefor archiving and sharing, as well as RAID array rebuilding on systems using ZFS and other file systems. Built and tested for up to 8-bay NAS systems, this drive gives you flexibility, versatility, and confidence in storing and sharing your home and work files.
For Small and Medium Businesses
Stream, backup, share and organize your digital content with a NAS and WD Red Plus drive designed to share content with the devices at your home or business. NASware 3.0 technology increases your drive’s compatibility with your existing network and devices. For larger businesses with up to 24 bays, upgrade to WD Red Pro drives.
NASware 3.0
Not just any drive will do. Get a large storage capacity in your 8-bay system and with Western Digital’s NASware 3.0 technology, you can optimize each and every drive. Built into every WD Red Plus hard drive, NASware 3.0’s advanced technology improves storage performance by increasing compatibility, integration, upgradeability, and reliability.
WD WESTERN DIGITAL 4TB Red Plus 5400 rpm SATA III 3.5″ Internal NAS HDD
Expand the capacity of your small- to medium-sized business or home office NAS with the WD 4TB Red Plus 5400 rpm SATA III 3.5″ Internal NAS HDD bundle from B&H. This kit includes two 4TB 3.5″ 5400 rpm SATA III NAS hard drives for a total of 8TB. With multiple drives, you can configure various RAID modes to help enhance transfer speeds and the data integrity for your NAS. Each WD Red Plus drive uses CMR technology and features a sustained data transfer rate of up to 150 MB/s with a built-in noise and vibration protection.
General Features
Tackle Intensity with WD Red Plus
Packed with the power to handle the small- to medium-sized business NAS environments and increased workloads for SOHO customers, WD Red Plus is made for archiving and sharing, as well as RAID array rebuilding on systems using ZFS and other file systems. Built and tested for up to 8-bay NAS systems, this drive gives you flexibility, versatility, and confidence in storing and sharing your home and work files.
For Small and Medium Businesses
Stream, backup, share and organize your digital content with a NAS and WD Red Plus drive designed to share content with the devices at your home or business. NASware 3.0 technology increases your drive’s compatibility with your existing network and devices. For larger businesses with up to 24 bays, upgrade to WD Red Pro drives.
NASware 3.0
Not just any drive will do. Get a large storage capacity in your 8-bay system and with Western Digital’s NASware 3.0 technology, you can optimize each and every drive. Built into every WD Red Plus hard drive, NASware 3.0’s advanced technology improves storage performance by increasing compatibility, integration, upgradeability, and reliability.
Built for NAS Compatibility
WD Red Plus drives with NASware technology take the guesswork out of selecting a drive. Optimized for NAS environments, WD’s algorithm balances performance and reliability in NAS and RAID environments. Simply put, a WD Red Plus drive is compatible with a wide range of NAS enclosures.
3D Active Balance Plus
WD’s enhanced dual-plane balance control technology improves the overall drive performance and reliability. Hard drives that are not properly balanced may cause excessive vibration and noise in a multi-drive system, reduce the hard drive life span, and degrade performance over time.
24/7 Environments
Since your NAS system is always on, a reliable drive is essential. With an MTBF of up to 1 million hours, WD Red Plus is engineered to tackle 24/7 environments.
WD Plus Internal HDD Specs
Storage
| Storage Capacity | 4 TB |
| Cache Memory | 64 MB |
Performance
| Interface | SATA III (6 Gb/s) |
| Write Speed | Maximum: 150 MB/s |
| Read Speed | Maximum: 150 MB/s |
Physical
| Drive Type | HDD |
| Form Factor | 3.5″ |
| Noise Level | 28.0 dB (Active) 25.0 dB (Idle) |
HDD Specs
| Spindle Speed (RPM) | 5400 RPM |
Reliability / Data Integrity
| Endurance (Total Bytes Written) | 180 TB |
| Load/Unload Cycles | 600,000 |
| Mean Time Between Failures (MTBF) | 1.0 Million Hours |
| Non-Recoverable Read Errors per Bits Read | 1 in 1014 |
Electrical
| Power Draw | 4.5 W (Active) 3.3 W (Idle) 0.4 W (Standby) |
| Supported Voltage | 5 VDC, 12 VDC |
| Current | 1.75 A at 12 VDC |
Environmental
| Operating Shock | 65 G / 2.0 ms |
| Storage Shock | 250 G / 2.0 ms |
| Operating Temperature | 32 to 140°F / 0 to 60°C |
| Storage Temperature | -40 to 158°F / -40 to 70°C |
General
| Certifications | RoHS, as per Manufacturer |
| Dimensions (W x H x D) | 4 x 1.03 x 5.79″ / 101.6 x 26.1 x 147 mm |
| Weight | 1.5 lb / 0.68 kg |
| Warranty Length | Limited 3-Year Warranty |
Packaging Info
| Package Weight | 1.53 lb |
| Box Dimensions (LxWxH) | 7.5 x 5 x 2.6″ |
Based on 0 reviews
Be the first to review “WD WESTERN DIGITAL 4TB Red Plus 5400 rpm SATA III 3.5″ Internal Intelligent NAS HDD”
Related products
-
SATA SSD, STORAGE, SYNOLOGY
Synology 2.5″ SATA SSD SAT5200 960GB, SAT5200-960G
Synology 2.5″ SATA SSD SAT5200 960GB, SAT5200-960G
The 960GB SAT5200 SATA 2.5″ SSD from Synology is an enterprise-grade SSD built for select models of their NAS systems, including the FS6400, FS3600, and FS3400. It provides stable I/O performance and reduced latency for critical services and applications and is also able to handle mixed and intensive 24/7 workloads without reducing its endurance. All of these facets will provide users with a streamlined experience with minimal service disruptions.
This SSD has an overall capacity of 960GB, a SATA III 6 Gb/s interface, a 2.5″ / 7mm form factor, sequential read speeds of up to 530 MB/s, sequential write speeds of up to 500 MB/s, random reads of 98,000 IOPS, and random writes of 67,000 IOPS. It also features an endurance of 2290TB TBW (terabytes are written), 1.3 DWPD (drive writes per day), a 1.5 million hour MTBF (mean time between failures), and an UBER (uncorrectable bit error rate) of <1 sector per 1017 bits read.
SKU: SAT5200-960G -
HDD, SEAGATE, STORAGE
Seagate 16TB SkyHawk AI 7200 rpm SATA III 3.5″ Internal Surveillance HDD
Seagate 16TB SkyHawk AI 7200 rpm SATA III 3.5″ Internal Surveillance HDD
Designed for AI surveillance, SkyHawk AI supports up to 64 HD cameras and 32 additional AI streams while offering capacities up to 18 TB. It delivers zero dropped frames with ImagePerfect AI and has enterprise-class workload rates at 550 TB/yr for high reliability.
24×7 workloads can leverage up to 8 TB with drives designed for DVR and NVR systems. SkyHawk surveillance drives are equipped with enhanced ImagePerfect™ and SkyHawk Health Management to help you sail through your toughest challenges.
Key Features- Designed for 24/7 Surveillance
- 16TB Storage Capacity
- 3.5″ Form Factor
- SATA III 6 Gb/s Interface
- 256MB Cache
- 7200 rpm
- 250 MB/s Max Sustained Transfer Rate
- 1.5 Million Hours MTBF
- 300,000 Load/Unload Cycles
SKU: ST16000VE002
There are no reviews yet.