Huawei S110-16LP2SR 16port POE Switch

400,158.00

They feature flexible Ethernet networking, diversified security control, and abundant management methods, and provide higher performance and richer service.

0 People watching this product now!
SKU: S110-16LP2SR Categories: ,
Description

110-16LP2SR appearance

1 PWR indicator 2 Sixteen GE PoE+ electrical ports

NOTE:

Only the new model with the Forwarding First and PoE First silkscreens on the front panel supports the following functions:

Forwarding First: This function is available on ports 1 to 4. With this function, traffic on ports 1 to 4 is preferentially forwarded when traffic congestion occurs on uplink ports.

PoE First: This function is available on ports 1 to 8. With this function, terminals connected to other ports will not preempt the power of ports 1 to 8 when the device cannot supply full PoE power to connected terminals; additionally, the power of these ports will be preferentially restored after the device restarts.

3 Electrical port indicator 4 Two GE optical ports
5 Optical port indicator 6 Port mode switch button

NOTE:

Standard Mode: All ports are in the same VLAN, and the flow control function is enabled.

Port Isolation: All downlink ports are isolated from each other and cannot communicate with each other. Downlink ports can communicate only with uplink ports. (The last two downlink electrical ports are not isolated.) Uplink ports are not isolated or aggregated.

Uplink Aggregation: Two uplink optical ports are aggregated into a trunk interface. Eth-Trunk supports load balancing only based on source physical ports.

Flow Control Disabling: All ports are in the same VLAN and flow control is disabled.

7 Port indicator status switch button

NOTE:

Port status: The port indicator indicates the data transmission status of the port.

PoE status: The port indicator indicates the PoE status of the port.

8 Ground screw
9 AC socket

NOTE:

Use the power cable delivered with the device.

Ports

Ports on the S110-16LP2SR

Port Connector Type Description Available Components
GE PoE+ electrical port RJ45 A GE PoE+ electrical port sends and receives service data at 10/100/1000 Mbit/s.

The port supports the PoE function.

Ethernet cable
GE optical port SFP A GE optical port can send and receive data at 100/1000 Mbit/s.
  • FE SFP/eSFP optical modules (only optical modules with transmission distances less than or equal to 15 km are supported)
  • GE eSFP optical modules (only optical modules with transmission distances less than or equal to 10 km are supported)

Indicators and Buttons

Description of indicators on the device

Indicator Color Status Description
PWR indicator Off The device is powered off.
Green Steady on The power supply is normal.
Port indicator (Port status)

 

Off The port is not connected or has been shut down.
Green Steady on A link has been established on the port.

NOTE:

During device startup, all port indicators are steady green for about 2 seconds and then off, indicating that service initialization is complete.

Green Blinking The port is sending or receiving data.
Port indicator (PoE status) Off The port is not supplying PoE power.
Green Steady on The port is supplying power to the connected PD.
Green Blinking The PoE power of the device is insufficient, and the port cannot provide power to the PD.

Power Supply System

The device uses the power adapter delivered with the device to supply power to the device and the connected PD. The power adapter can provide 124 W PoE power, which ensures full PoE power on 8 ports in compliance with 802.3af or on 4 ports in compliance with 802.3at.

Heat Dissipation System

The device has no fans and uses natural heat dissipation.

Technical Specifications

Technical specifications of the S110-16LP2SR

Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 260.0 mm (1.72 in. x 17.40 in. x 10.24 in.)

Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 267.0 mm (1.72 in. x 17.40 in. x 10.51 in.)

Dimensions with packaging (H x W x D) [mm(in.)] 90.0 mm x 555.0 mm x 400.0 mm (3.54 in. x 21.85 in. x 15.75 in.)
Chassis height [U] 1 U
Chassis material Metal
Weight without packaging [kg(lb)] 3.0 kg (6.61 lb)
Weight with packaging [kg(lb)] 3.7 kg (8.16 lb)
Typical power consumption [W] 22.0 W
Typical heat dissipation [BTU/hour] 75.07 BTU/hour
Maximum power consumption [W] Without PoE: 22.0 W

Full PoE load: 160.0 W (PoE: 124 W)

Maximum heat dissipation [BTU/hour] Without PoE: 75.07

Full PoE load: 545.94

Static power consumption [W] 12.0 W
MTBF [years] 57.77 years
MTTR [hours] 2 hours
Availability > 0.99999
Noise at normal temperature (acoustic power) [dB(A)] Noise-free (no fans), < 30
Noise at normal temperature (acoustic pressure) [dB(A)] Noise-free (no fans), < 20
Number of card slots 0
Number of power slots 0
Number of fans modules 0
Working mode
  • Standard mode
  • Port isolation
  • Uplink aggregation
  • Flow control disabling
MAC address entry 8K
Redundant power supply Not supported
Long-term operating temperature [°C(°F)] 0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.)
Restriction on the operating temperature variation rate [°C(°F)] When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)] 0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)] 0-5000 m (0-16404 ft.)
Power supply mode AC built-in
Rated input voltage [V] AC input: 100–240 V AC; 50/60 Hz
Input voltage range [V] AC input: 90 V AC to 300 V AC; 47 Hz to 63 Hz
Maximum input current [A] 3 A
Memory
Flash memory
Console port Not supported
Eth Management port Not supported
USB Not supported
RTC Not supported
RPS input Not supported
Service port surge protection [kV] Common mode: ±4 kV
Power supply surge protection [kV] Differential mode: ±6 kV; common mode: ±6 kV
Ingress protection level (dustproof/waterproof) IP20
Types of fans None
Heat dissipation mode Natural heat dissipation
Airflow direction
PoE Supported
Certification EMC certification

Safety certification

Manufacturing certification

Additional information
Brand

Huawei

Solutions

Datacom & Storage

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Huawei S110-16LP2SR 16port POE Switch”
Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.